Install.dmg Is Not Going To Flash Drive

Making Windows bootable USB drive from ISO file is a common task in our daily if you owns a Mac. In this tutorial, we will show you 3 ways to create bootable Windows 10/8/7 USB on Mac. Like we said, an external macOS installation will probably be pretty slow and you’re probably only going to want to use it when the situation calls for it, such as if you’re having trouble with your internal drive or you want to use your portable macOS Sierra installation on another compatible Mac.

Can't save files to the USB flash drive

'I'm in deep trouble saving files to a SanDisk USB flash drive. My computer recognizes the flash drive but I can't save pictures or documents to it. Ctrl C+V is not working, the 'save' or 'save as' option is not working, even dragging files directly to the flash drive is still not working. What's the problem? How to save files to a USB flash drive as usual?'

Being a removable storage device that is portable, a USB thumb drive, memory stick or floppy disk is designed to store data so that people can take it anywhere and transfer files easily. Since a flash drive that cannot save files is useless, you must spend some effort in finding a troubleshooting method so as to bring it back to life.

3 ways to fix flash drive not saving files properly

Here, three workable methods are available for you when you can't save files to a USB flash drive, or when your flash drive is not saving files as it could have, including formatting FAT32 to NTFS, extending volume size and obtaining an access permission.

Install.dmg Is Not Going To Flash Drive

Fix 1: Format the USB flash drive and convert FAT32 to NTFS

If you are unable to copy or save files to the drive due to error 'file is too large for destination file system', you should know that the cause of the problem is related to the file system of the device. The common file systems of an external usb drive, USB or memory card are NTFS, FAT32 and exFAT. When your file is larger than 4GB and your flash drive comes with FAT32, you can't save file there due to the file system's maximum file size is 4GB.

To fix the matter, you can either use Windows Disk Management to format FAT32 to NTFS or use a third-party EaseUS Partition Master to convert FAT32 to NTFS directly without erasing data. For data safety, we bly recommend you try the professional solution without data loss.

Download and install EaseUS free partition manager on a Windows computer. Make sure your flash drive has connected to the machine correctly. Then follow the steps below to covert your FAT32 to NTFS.

Step 1: Install and launch EaseUS Partition Master on your computer.

Step 2: Select a FAT32 partition, right-click on it and select 'Convert to NTFS'. If you need to convert a storage device such as SD card or USB flash drive to NTFS, insert it into your PC first and repeat the previous operation.

Step 3: Click 'OK' on the pop-up dialog box to continue.

Step 4: Go to the upper left corner, click the 'Execute 1 Operation' button and you will see the operation details. Click 'Apply' and 'Finish' when the process completes.

Fix 2: Extend volume size when the disk is almost full

Did you receive the 'low disk space' warning while trying to save files to a selected volume of the flash drive? If yes, proceed to troubleshoot the issue with EaseUS Partition Master.

Step 1: Launch EaseUS Partition Master

Step 2: Free up space to extend partition

Launch Terminal (in /Applications/Utilities). Select the text of this Terminal command and copy it:sudo /Applications/Install OS X Yosemite.app/Contents/Resources/createinstallmedia -volume /Volumes/Untitled -applicationpath /Applications/Install OS X Yosemite.app -nointeraction. Yosemite zone dmg download. Warning: This step will erase the destination drive or partition, so make sure that it doesn’t contain any valuable data.

If the hard drive has enough unallocated space to extend the target prtition, jump to Step 3 and continue.

If not, free up space first:
1. Right-click on a partition next to the target partition and select 'Resize/Move'.
2. Drag the partition ends to free up space, leaving enough unallocated space behind the target partition, click 'OK'.

Step 3: Extend partition

1. Right-click on the target partition and select 'Resize/Move'.

2. Drag the target partition handle into the unallocated space to extend partition.

Step 4: Keep all changes

Click the 'Execute Operation' button and click 'Apply' to keep all changes.

Fix 3: Obtain a permission to save files to a specific location

Now we're arriving at the last commonly seen error that will cause the trouble, which is 'you don't have permission to save in this location, contact the administrator to obtain permission'. This happens a lot when you're trying to save some certain Microsoft files.

Step 1: Press 'Windows + R' keys simultaneously and open 'Run'.

Step 2: Type netplwiz and hit 'Enter' to open the 'User Accounts' settings box.

Step 3: Select the user account that gives the error message.

Step 4: Click on 'Properties' and then 'Group Membership', select 'Administrator'and click 'Apply'.

Hope the three approaches we've given can help to solve your trouble in saving a file to USBsb flash drive or memory card. If none of the fixes works, it's highly like that your flash drive is write-protected. Try to remove write protection and get rid of the problem 'flash drive won't save files'.

Why we should make a bootable USB from ISO on Mac?Having a bootable Windows USB makes it very easy to install or conduct repairs on Windows based computers. It gives you a portable installation drive that you can carry with you wherever you go, and all you need is a USB flash drive with adequate storage, and the appropriate Windows ISO file. The benefits of creating such a bootable USB are obvious: convenience, speed and portability. As such, this is an essential tool for IT administrators working in a Windows environment. Whenever a user has an installation or repair-related problem, it will be immensely useful.

So, how do you create a bootable Windows 10 USB on Mac? That's the tricky question because you have to choose the most convenient way for the job. There are tons of ISO burning utilities available on the Internet, but not all of them have high burn success rates for bootable ISO files.

The three methods described below are all popular ways to do this on a Mac, but they differ in that they require various levels of technical expertise. Only one of these methods can be executed by novice users. Let's take a look at all three, and make sure you have a USB drive with enough space to hold a Windows disk image for the particular version you require. You will also need to download the appropriate Windows ISO file, which you can get from Microsoft's site.

Part 1: Create Windows 10 Bootable USB on Mac via Terminal (Without Bootcamp)

Before macOS High Serria rolled into public eyes, there are two simple apps available on Mac for creating bootable Windows USB. They are Bootcamp and Disk Utility. For un-known reason, Apple removed the feature from the two apps and no longer valid to make bootable Windows installation USB. However, you can use the Teminal app to perform command line task so you can create Windows bootable USB without Bootcamp or Disk Uitility.

Step 1: Insert an USB flash drive and open Disk Utility app from Launchpad. You will see the drive name of USB on left sidebar.

Step 2 : Right-click the drive name and choose 'Erase' from the drop-down menu. At there, you have to choose a partition format. For Windows installation disk, MS-DOS (FAT32) is preferred. Now, the disk will be erased and formatted with FAT32.

Step 3 : Now open Terminal app and type 'diskutil list'. This will list all the storage devices on Mac, such as /dev/disk2 (with names and patition scheme).

Step 4 : Now open Terminal app and type 'diskutil list'. This will list all the storage devices on Mac, at my computer is the USB drive is shown as /dev/disk2 (with name and patition scheme).

Step 4 : Run 'diskutil unmount Disk /dev/disk2' and hit Enter. Then input 'sudo dd if=/path/to/windows.iso of=/dev/disk2 bs=1m' . Replace the real path to Windows iso file. This command will write the ISO image to USB with bootable option.

Teminal is a great to make a bootable Windows 10 USB on Mac but it is also riksy enough! If you typed the wrong command, all the data on the selected drive would be erased and all data being vanished in seconds. So it is not ideal solution for beginners who don't know much technical staff.

Part 2: Create Bootable Windows 10/8/7 USB from ISO on Mac via UUByte

People are more willing to use tools that fix the certain issue at minimal effort. That's why we recommend UUByte ISO Editor at this section. It is a market-leading application for burning ISO files and creating bootable media. Its flexibility allows you to choose your storage medium and change burn settings in an easy manner. The utility is fully tested on the world's top PC brands running all the recent versions of Windows. It is compatible with multiple file systems as well as both legacy BIOS and UEFI boot schemes.

The most important features are the high burn success rate and the simple UI that allows even novice users to quickly burn bootable ISO files to a disk or USB flash drive. These features have made UUByte ISO Editor extremely popular among both Windows and Mac users around the world. In a matter of a few steps, anyone can create a bootable USB drive for Windows 10/8/7. The process has been described in detail below:

Key Features of ISO Editor

Install.dmg Is Not Going To Flash Drive Download

  • Make bootable disk from USB or CD/DVD.
  • Able to edit Windows ISO file before burning.
  • Support legacy and UEFI booting.
  • Create ISO image from local folders or files.
  • Work well on Windows 10/8/7 and macOS.

Step 1: Download UUByte ISO Editor on a Mac Computer

Download and install UUByte ISO Editor on a Mac computer. You need to input the user password before opening the program to authorize the permission. After that, you will see a clean user interface like this.

Step 2: Plug USB Flash Drive into Mac

When you launch the software, you will see multiple options on the home page. Click on 'Burn' to create the bootable disk.

Step 3: Import Windows ISO File and Start Burning it to USB on Mac

In the next window, select the bootable ISO file in the top section, and then the appropriate storage medium. Now click on 'Burn' after choosing the USB option.The bootable drive will be created in a few moments, and you can use it for Windows installations and other purposes. There's no confusion with advanced settings, no command line work and no other tools required to complete the process. The formatting is done by the software itself, so the user doesn't have to worry about lengthy and complex actions.

Creating bootable Windows USB on Mac is not that simple as you could image. You won't want to wait for an hour and found out the USB was useless becasue it couldn't boot Windows from it, right? That's why UUByte ISO Editor comes into help!

Part 3: Use CMD to Make Bootable Windows USB Drive from ISO

The Command Prompt is an extremely useful utility in Windows, but you have to know what you're doing. Command improperly executed can lead you to several issues down the road. Therefore, you need to be confident in doing command line work in order to use this method. You can certainly try it if you are a novice, but that may not be the recommended course of action. In Windows 10, it's very easy to create a bootable USB from an ISO file or disk image, but you need to format the USB drive first. The process is described as Step 0 below, but remember to remove the single quotes when entering commands:

Step 1 : Open the Command Prompt by pressing Windows + R and then typing ‘cmd' and Enter in the run box.

Step 2 : Now insert the USB drive and type in 'diskpart' , then hit Enter.

Step 3 : Once the disk partition utility is running, you'll see a new window. In this, type 'list disk' and Enter. Select the USB drive from this list; it will usually be Disk 1, so now input 'select disk 1' and hit Enter.

Step 4 : In the next step, input 'clean' and again press Enter. After you see the success message 'Diskpart succeeded in cleaning the disk'. Then you can type 'create partition primary' and again press Enter.

Step 5 : Next, type 'select partition 1' and press Enter, then type 'active' and Enter, and finally, 'format fs=ntfs quick' and Enter. The chosen partition is now formatted as the NTFS file system. Now type 'exit' and hit Enter again.

Step 6 : Assuming your ISO file is on your hard drive labeled D: Now input the following command, followed by Enter after each line:
d:
cd boot
bootsect /nt60 g: (this assumes that your USB drive has been assigned this letter; otherwise, change it as appropriate)

Step 8 : The above command creates a boot sector on your pre-formatted USB flash drive to create bootable media. You can now exit the Command Prompt with 'exit'.

Install.dmg Is Not Going To Flash Drive 2017

Cons:

  • Hard to understand.
  • Need to deal with text commands .
  • More risk to ruin the computer if you did it wrong.

Part 4: Create Bootable USB Drive from Multiple Windows ISO Files

RMPrepUSB helps you format drives and burn multiple bootable ISO files on a single drive. It's useful for when you need the same drive to contain different versions of Windows. The biggest drawback, however, is that it is built for pre-Windows 10 bootloaders. It works well with Windows XP, Windows 7 and Windows 8.

Interestingly, RMPrepUSB was originally written for the purpose of wiping, partitioning and formatting USB drives, but it has evolved into a much larger software with multiple features.

Step 1: The first step is to download the RMPrepUSB zip file, extract the .exe file and run it to install the software on your Windows PC. Then launch the application and follow the instructions provided below.

Step 2: To format the drive, there are five parameters that you must enter:
Partition size - set as MAX for maximum allowable partition size
Drive name - specify a name for your drive
Bootloader options (select the first option for Windows installations)
File system - for smaller USB drives use FAT16; for larger ones over 16GB, use NTFS.

Step 3: Finally, click on 'Prepare Drive' to format it and add the bootable ISO file.

Cons:

  • Complex settings and user interface.
  • Not supporting Windows 10 ISO .
  • Take a lot of time to find the correct user manual.

Conclusion:

Install.dmg Is Not Going To Flash Drive Free

RMPrepUSB utility is clearly not for everyone. If you have no experience handling disk images, then we recommend using Method 2 described above. UUByte ISO Editor does not require any sort of technical expertise, and the software comes with superb technical support if you get stuck at any point. With most other bootable media creation software, you'll come across issues like drive not found, file system incompatibility or other problems. Not with UUByte ISO Editor. It's the one software utility that you can trust to create bootable USB drives accurately every time.

Comments are closed.